DuraMax 13x10 Gable Roof Insulated Cabin Kit w/ Foundation (30932)

DuraMax 13x10 Gable Roof Insulated Cabin Kit w/ Foundation (30932)

The DuraMax insulated 13x10 building is an energy-efficient modular insulated building. The construction provides a strong lasting wall that reduces heat gain on summer or heat loss in winter making these buildings ideal for all weather conditions and usable for various purposes. Prefabricated buildings are the perfect alternative to building an office, workshop, hobby room, or temporary shelter with conventional construction materials like metal studs and drywall or concrete block. The installation is much faster because all of the components used to construct the prefabricated building have already been prepped at our factory. This prep process includes designing the layout and then pre-cutting all the materials at our factory and ready for immediate installation. Faster installation means also less mess. This can be especially important in areas where dust and debris could interfere with sensitive manufacturing operations. On average you can anticipate about a 80% time savings when using our modular design to construct your ideal room. 

Another advantage to using modular construction is that all of the materials purchased to construct your prefabricated building are reusable. If you need to move your building simply disassemble the components and move them to your new location. All of the components purchased are reusable. If you need to modify the original layout simply contact us. We’ll redesign your building even if no additional materials are required. This includes a new and detailed drawing that shows how all components will be integrated into your new layout. This added flexibility would not be possible if you had utilized conventional construction materials to build your office.  We offer a wide array of wall construction designs for meet the broadest range of application. Our wall systems are also available in a range of thicknesses to accommodate different application requirements.

Features:

• Fire retardant materials
• Durable insulated composite panels that will not rust, rot, or mildew
• Impervious to termites
• Foundation kit included! (finishing materials plywood or concrete not included)
• One double pane, swing open window with latch included!
• Includes gutters on front and back roof lines!
• Key Lockable Door and Deadbolt included!
• Snow load tested up to 30 lbs per square foot!
• Large Panel Easy Assembly in just 5 hours! (approximate)
• Corrugated insulated roof
• Smooth interior wall finish
• Shelving can be mounted easily on all wall panels
• Panels insulated with polyurethane in between galvanized steel on the outside and smooth inside
• Can be disassembled and reassembled, portable!
• Insulation keeps stored items up to 15% cooler or warmer than outside temperatures!

Specifications:
Color: Neutral Off-White with Gray Trim
Base Dimensions: 159 1/4"W x 120 5/8"D
Door Opening: 36 1/4"W x 77 7/8"H
Roof Edge to Edge Dimensions: 162 1/8"W x 127 1/8"D x 104 1/8"H
Interior Dimensions (wall to wall): 156 7/8"W x 118 1/4"D x 81 1/2"H

BEFORE YOU BEGIN:
1. Check your local building codes regarding footings, location, etc.
2. Select a site that allows enough working space around the shed.
3. Determine building foundation and anchor system.
4. Read and understand the Owner’s manual enclosed in the package.
5. Follow all directions and dimensions thoroughly.
6. Follow the steps given in the manual carefully for correct assembly.
7. Make sure all parts are present before you start assembling.
8. BE SAFE: Follow safety instructions and avoid injury.
(See inside page).
9. GROUND MUST BE EVEN: Make sure the foundation frame lies flat on the ground. If the earth bed is uneven, remove
the sod and other debris and level it with a flat shovel.
10. Separate the contents of the carton by the part number and review the list. Be sure you have all the necessary parts for your shed.
Refer Owner’s manual for the part list.

PACKAGING:
The building is packaged in a heavy-duty cardboard box and plastic shrink-wrapped on a wood pallet. The
packaging includes all components, hardware, and an illustrated step-by-step instruction booklet. Shipped
common carrier and requires lift gate for residential delivery

ASSEMBLY MADE EASY:
The assembly is simple, clean, safe and can be completed in four to five hours with two people. All parts are pre-cut, drilled, and numbered for ease of assembly. All you need to provide is a level surface of either wood or concrete, the size of the desired building. In addition, you will need a power drill, hammer, measuring tape, pliers, and a ladder.